The RTL8366SC-CG is a LQFP128, high-performance 4+2-port 10/100/1000M Ethernet switch featuring a low-power integrated 4-port Giga-PHY that supports 1000Base-T, 100Base-TX, and 10Base-T.
For specific applications, the RTL8366SC supports one extra interface that could be configured as RGMII/MII interfaces. The RTL8366SC also supports one Ser-Des interface that could be configured as SGMII/HSGMII interfaces. The RTL8366SC integrates all the functions of a high-speed switch system; including SRAM for packet buffering, non-blocking switch fabric, and internal register management into a single CMOS device.
Single-chip 4+2-port 10/100/1000M non-blocking switch architecture
Embedded 4-port 10/100/1000Base-T PHY
Each port supports full duplex 10/100/1000M connectivity (half duplex only supported in 10/100M mode)
Extra Interface (Extension GMAC1) Supports High Speed Serial Interface (Extension GMAC1)
SGMII (1.25GHz) Interface
High SGMII (3.125GHz) Interface
Extra Interface (Extension GMAC2) supports
Media Independent Interface (MII)
Reduced 10/100/1000M Media Independent Interface (RGMII)
Full-duplex and half-duplex operation with IEEE 802.3x flow control and backpressure
Supports 9216-byte jumbo packet length forwarding at wire speed
4-Port 1000Base-T Switch
4-Port 1000Base-T Router with one SGMII/HSGMII
4-Port 1000Base-T Router with one SGMII/HSGMII and one MII/RGMII